Delivery drive assembly 2 2 1 Figure 77. Removing the delivery drive assembly 1 To remove the delivery drive assembly: a Remove the rear right side cover (page 138). b Remove the control panel (page 139). c Remove the top cover (page 141). d Remove the rear cover/rear output bin (page 145). e Remove the fuser assembly (page 149). f Remove the output delivery assembly (page 152) g Remove the formatter assembly (page 151). 2 Remove the two screws (callout 1). 3 Unplug the three-pin connector (callout 2) shown. 4 Lift the delivery drive assembly upward, away from the printer. 170 Removing and replacing parts EN