Table 37. Printer messages (continued) Control panel message Explanation Recommended action LOADING PROGRAM [NUMBER] alternates with DO NOT POWER OFF Programs and fonts can be stored on the printer’s file system. At startup time, these entities are loaded into RAM. (These entities can take a long time to load into RAM depending on the size and number of entities being loaded.) The specifies a sequence number indicating the current program being loaded. Wait for the program to load. MANUALLY FEED [TYPE] [SIZE] One of the following occurred: 1. Load the requested paper into tray 1. 2. Press G O if the desired paper is already loaded in tray 1. 3.
Press -V ALUE + to scroll through other available types and sizes. 4. Press S ELECT to accept the alternate type or size. ! A manual feed was requested. ! There is no media in tray 1. ! The wrong size of media is loaded. ! The control panel is not set for the size and type of media loaded. MEMORY FULL STORED DATA LOST There is no available memory in the printer. The current job might not print correctly and some resources (such as downloaded fonts or macros) might have been deleted. Advise the customer to add more memory to the printer or to simplify the print job.
MEMORY SETTINGS CHANGED The printer changed its memory settings because it did not have enough memory to use the previous settings for I/O buffering and resource saving. This usually occurs after removing memory from the printer, adding a duplexer, or adding a printer language. Advise the customer to add more memory to the printer or to simplify the print job. EN Chapter 7 Troubleshooting 199