Table 27. EIO menu (continued) Item Values Explanation CFG IPX/SPX=NO NO YES Select whether you want to use the IPX/ SPX menu and set IPX/SPX protocol parameters. NO : Bypass the IPX/SPX menu items. YES : Use the IPX/SPX menu items. In the IPX/SPX menu, you can specify the frame-type parameter used on your network. The default is AUTO , to automatically set and limit the frame type to the first one detected. For Ethernet cards, frame type selections are EN_8023, EN_II, EN_8022, EN_SNAP . For Token Ring cards, frame type selections include TR_8022, TR_SNAP .
In the IPX/SPX menu for Token Ring cards, you can also specify NetWare Source Routing parameters, which are SRC RT=AUTO (default), OFF , SINGLE R , or ALL RT . CFG TCP/IP=NO NO YES Select whether you want to use the TCP/IP menu and set TCP/IP protocol parameters. NO : Bypass the TCP/IP menu items. YES : Use the TCP/IP menu items. In the TCP/IP menu, you can specify BOOTP=YES or DHCP=YES for TCP/IP parameters to be automatically loaded from a bootP or DHCP server when the printer is turned on. If you specify BOOTP=NO and DHCP=NO , you can manually set the following TCP/IP parameters from the control panel:
each byte of the IP address (IP), Subnet Mask (SM), Syslog Server (LG), and Default Gateway (GW). You can also manually set the idle timeout period. Print an HP JetDirect configuration page to verify your settings. However, note that the print server might overwrite selected parameters with values that ensure proper operation. EN Chapter 3 Printer operation 71