Button battery warning labels (only visi- 2. Pry open the cover of the key using a ble in some countries, e.g. Australia) flathead screwdriver, and remove the cover. 1 CAUTION Operation 〉 Both hands must be dry during the process. Moisture may cause rusting of the battery. 〉 The smart key contains electronic ele- ments, which must be protected from damage caused by shock, high tem- 77636832C0AF 3. Take out the battery and insert a new perature, exposure to sunlight, liquids, battery in its place. humidity and corrosion. 〉 Do not touch or move any other parts. 〉 Always install positive and negative terminals of the battery properly. 〉 Be careful not to lose parts when re- placing the battery.
1. Push the release button of smart key to eject the mechanical key. B0B391378D50 When installing the battery, make sure that the positive terminal of the battery is facing down. Battery model: CR2032 4. Install the rear key cover. After installation, make sure that all the key buttons are working properly. C1BA6E3E9AB8 Ⓐ Release button Ⓑ Mechanical key 20 Keys