Thermal protection function Speed Closing Thermal protection may be triggered to protect With the power supply in OFF mode, when all the glass lifter motor after repeated operation of the window switch. At this time, the window the doors and back door are closed, press and hold the lock button on the key or the lock switch will temporary failure. The window switch automatically returns to normal after the lifter sensor on the door handle to automatically close the windows. motor cools down. Anti-pinch function Press the key unlock or lock button to stop rising window if they are going up automatically.
In the process of automatic vehicle window closing, if a foreign object is sensed between Notice the vehicle window frame and the vehicle If an obstacle between the window glass and the window frame is found during the window, the vehicle window will stop closing and automatically descend for a certain distance. automatic ascending of the window glass, the anti-pinch function will be triggered, and the Notice driver must confirm that the windows are Due to different vehicle configurations, only the completely closed before leaving. Initialization driver side vehicle window of some vehicles is equipped with this function.
⚠ Warning When errors occur in one-push raising or Never test the anti-pinch function with any lowering function, you can reset it through the following operations: part of your body. At the moment when the vehicle window is 1. Switch the power to OFF mode. 2. Pull up the window switches equipped with complete closed, the anti-pinch function will not work if something gets stuck. one-push raising or lowering function beyond the pressure point until the window is completely closed and then hold for about 3 Under severe conditions, such as low temperature and severe bumping, the anti- Notice seconds. 3.
Operate the window switch again so that the pinch function may be triggered in the process of window glass ascending, and the vehicle window window goes through the one-push raising cannot be closed smoothly. At this time, please and one-push lowering. pull up the vehicle window switch till it exceeds the pressure point to close the vehicle window. Notice When the one-push raising or lowering function is disordered or every time the battery is Delay function disconnected and re-energized, the windows The vehicle windows can still be operated within a few seconds after the power supply is with one-push function need to be initialized. switched to OFF.
Notice Some models are equipped with this function on the driver side window only, depending on the vehicle model. 25