Safety Warning! To fasten the seat belt: ■ Do not use aggressive chemicals like bleach, dye, or chemical solvents when cleaning the seat belt. Doing so might severely weaken the seat belts, possibly causing them to fail completely, which could result in death or serious injury. 1 Adjust the seat to the appropriate position. 2 Pull the seat belt slowly out of the retractor. Use gentle detergents and soft brushes to clean the seat belts. To avoid mold growth in the retractor, keep the seat belts fully extended and let them air dry completely before retracting them. Use the seat belt For recommended seating position and seat belt usage, see ,please see Seating recommendations (p. 80).
Fasten the seat belt Before fastening the seat belt: ■ Make sure the seat is as upright as possible (do not recline the seat further than necessary). ■ Make sure the seat is raised enough for the belt to sit across your shoulder. Avoid letting the belt chafe against your neck. ■ Make sure the seat buckle is clean and free from foreign objects. ■ Use only the belt buckle matching the seat belt. ■ Remove all slack from the seat belt by pulling upward from above the belt buckle, and make sure it is not twisted. ■ Avoid wearing the seat belt over bulky clothing that could prevent the belt from fitting tightly against your body.
3 Insert the seat belt tongue into the belt buckle until it clicks into place. 4 Pull the seat belt back toward the retractor so it fits tightly. Release the seat belt 20