Safety Caution! To install a child seat in the rear passenger seat: ■ It is important to install the child seat correctly even when it is not in use. Failure to do so can cause the child seat to get detached from its place when driving and injure the car's occupants or damage the car's interior. ■ When installing or removing the top tether strap, do not touch any other part in or under the seat than the anchor point. Doing so could result in injury. 1 Secure the child seat with the car's belt following the instructions provided by the child seat manufacturer. 2 Tighten the seat belt by pulling it in around the child seat.
3 Make sure that the child seat does not touch the front passenger seat. 4 Make sure that the child seat is securely installed by pulling it away from the seat and shaking it from side to side. Note: Prolonged child seat installation may damage the car's interior. We recommend using seat protectors or kick guards to alleviate wear on the car's seats. ISOFIX child seat installation The outer rear seats are equipped with ISOFIX/i-Size lower anchors and top tether anchors. Note: If the child seat interferes with the headrest, the headrest can be removed. Belt-based child seat installation To install a child seat in the front passenger seat: 1 Deactivate the front passenger airbag.
2 Move the front passenger seat to the highest position. 3 Secure the child seat with the car's belt following the instructions provided by the child seat manufacturer. 4 Tighten the seat belt by pulling it in around the child seat. 5 Make sure that the child seat is securely installed by pulling it away from the seat and shaking it from side to side. 23