4. Triangle bracket The parameters in the triangular bracket must be replaced with an effective value. Parameter Type 1. Bool The parameter is ON, OFF, 1 or 0. For example: :MEASure:ADISplay :MEASure:ADISplay? Among them: can be set to:{{1|ON}|{0|OFF}}. Query back 1 or 0 2. Discrete The parameter takes the option listed. For example: :ACQuire:TYPE :ACQuire:TYPE? Among them: can be set as: NORMal|AVERages|PEAK|HRESolution. Query Return to abbreviations: NORM, AVER, PEAK or HRES. 3. Integer Unless there is another instructions, the parameters can be an arbitrary integer (NR1 format) within the effective value range.
Note that at this time, please do not set the parameter as a decimal format, otherwise there will be abnormalities. For example: :DISPlay:GBRightness :DISPlay:GBRightness? Among them: can be set to: Our integer between 0 and 100. The query returns an integer between 0 and 100. 4. Real The parameters can be arbitrarily numbered within the valid value range. The command accepts the parameter input of the decimal (NR2 format) and the scientific count (NR3 format) format. For example: :TRIGger:TIMeout:TIMe :TRIGger:TIMeout:TIMe? Among them: The parameter can be set to a real number between 1.6e-08 (ie 16ns) and 1e+01 (ie 10s). The query returns a real number in the scientific 5.
ASCII String counting format. The combination of the parameter is the combination of ASCII characters, for example: :SYSTem:OPTion:INSTall Among them: can be set to: PDUY9N9QTS9PQSWPLAETRD3UJHYA Order abbreviation