32LD380TA Location of controls 1 2 3 4 5 ENGLISH Top Right Side Approx. 6˚ Approx. 2˚ Front Side Left Side 6 7 10 9 8 11 You can adjust the angle of the TV-screen for 2˚ forward or for 6˚ backward from vertical angle. Description of Indicators and Controls 1. (SUB-POWER) button: To turn the unit standby mode on and off. 2. INPUT-button: Select input mode for TV/AV/COMPONENT/HDMI/PC. 3. MENU-button: To display the menu-screen. 4. VOLUME / buttons : To adjust the volume. In Menu : Setting. 5. PROGRAM / buttons: Press to change to a higher numbered channel set into memory. Press to change to a lower numbered channel set into memory. In Menu : Setting. In Standby : Turning on the unit. 6.
HEADPHONES jack: Plug headphones with a mini plug (3.5 mm) into this jack. 7. AV3-Input: Input for analogue A/V-Signal (Composite). If your equipment has an S-video connector, use an S-video cable instead of a standard yellow video cable (You still must connect the standard red and white audio cables for full system connection, but do not connect a standard yellow video cable at the same time or the picture performance will be unacceptable.) 8. Main Power Switch: To turn the unit on or off completely. 9. Loudspeakers 10. Remote sensor 11. STANDBY/ON mode indicator: It lights up in red at STANDBY, and in green at POWER ON. 9 3V90441A [E] P09-12 31/10/05, 9:21 AM 9 HITACHI