3.3.8 Replace Carburetor and Distributor Remove your old carb and distributor and replace them with the spiffy rebuilt ones from JimC. 3.3.9 Route Vacuum Lines Grab your two rolls of vacuum line (3mm and 6mm) and something to cut them with, then start working through the Vacuum Line Routing section to get things connected. 3.3.10 Set Timing Set the ignition timing per instructions. 3.3.11 Adjust Carburetor Adjust carburetor idle, fast idle, idle mixture per instructions. 3.3.12 Install Air Cleaner Install the air cleaner and hook up the final vacuum lines. Version 2 / 01-May-2011 Page 14 of 24