Removal and Installation Carriage Assembly and Belt Removal WARNING Switch off the Printer and remove the power cord. 1. Remove the Left Hand Cover - Refer to Page 8-6 . 2. Remove the Right Rear Cover - Refer to Page 8-16 . 3. Remove the Right Hand Cover - Refer to Page 8-10 . 4. Remove the Tensioner Assembly - Refer to Page 8-42 . 5. Pull out Printhead Cleaner Carriage. 6. Slide Carriage Assembly to position shown. 8-46 HP DesignJet 5000 and 5500 Series Printers Service Manual