HP — HP LaserJet 3390/3392 All-in-One Service Manual (EN)

Copyright information © 2005 Copyright Hewlett-Packard Development Company, L.P. Safety information WARNING! Trademark credits Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation. Potential Shock Hazard Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Always follow basic safety precautions when using the all-in-one to reduce risk of injury from fire or electric shock. Linux is a U.S. registered trademark of Linus Torvalds. The information contained herein is subject to change without notice. Read and understand all instructions in the user guide.

UNIX® is a registered trademark of The Open Group. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. PostScript® is a trademark of Adobe Systems Incorporated. Observe all warnings and instructions marked on the all-in-one. Use only a grounded electrical outlet when connecting the all-in-one to a power source. If you do not know whether the outlet is grounded, check with a qualified electrician. Energy Star® and the Energy Star logo® are U.S.

registered marks of the United States Environmental Protection Agency. Do not touch the contacts on the end of any of the sockets on the all-in-one. Replace damaged cords immediately. Part number Q6500-90901 Edition 2, 10/2005 Unplug the all-in-one from wall outlets before cleaning. Do not install or use the all-in-one near water or when you are wet. Install the product securely on a stable surface. Install the all-in-one in a protected location where no one can step on or trip over the power cord and where the power cord will not be damaged. If the all-in-one does not operate normally, see the online user guide. Refer all servicing questions to qualified personnel.

Information regarding FCC Class B, Parts 15 and 68 requirements can be found in the user guide.