3. On the left side of the product, release the innermost tab (callout 1) at the center of the gear, and then remove the gear (callout 2). NOTE: The gear is composed of two pieces. Releasing the outer tab does not remove the entire gear assembly and exposes an internal spring in the gear. Figure 1-4 Remove the MP tray separation pad (1 of 5) 1 2 3 Reinstallation tip Press and hold back the gear arm (callout 3) when reinstalling the pickup gear. 4. In the toner cartridge cavity, pull back the pickup roller cover, and then use a small flat-blade screwdriver to release the tab (callout 1) on the pickup roller shaft.
Figure 1-5 Remove the MP tray separation pad (2 of 5) 1 ENWW Removal and replacement procedures 7