5. On the top of the top-cover assembly, remove two screws (callout 1). Figure 1-16 Remove the top-cover assembly and LCD control-panel module (3 of 3) 1 6. Lift the top-cover assembly off of the product to remove it. NOTE: You do not need to remove the control panel from the top cover assembly, unless you are replacing the control panel. LCD control panel 1. Remove the following components: ● Tray 2 cassette ● Right cover. See Right cover on page 12 . ● Left cover. See Left cover on page 11 . ● Top cover assembly. See Top cover with LCD control-panel module on page 13 . 14 Chapter 1 Removal and replacement ENWW