Right cover 1. Remove the following components: ● Tray 2 cassette ● Left cover. See Left cover on page 13 . ● Scanner assembly. See Scanner assembly on page 13 . ● Control panel. See Control panel on page 15 . 2. Open the toner cartridge door and the rear jam access door. 3. Grasp the rear edge of the cover and pull that edge toward the rear to release the four tabs (callout 1) on the rear edge of the cover, and then use a small flat-blade screwdriver to release the tab (callout 2) at the top edge of the cover. Figure 1-22 Remove the right cover 2 1 4. With the back and top edges loose, carefully slide the cover toward the front of the product, and then remove it.
ENWW Removal and replacement procedures 17