Top cover 1. Remove the following components: ● Tray 2 cassette ● Left cover. See Left cover on page 13 . ● Scanner assembly. See Scanner assembly on page 13 . ● Control panel. See Control panel on page 15 . ● Right cover. See Right cover on page 17 . 2. Open the toner cartridge door and the rear jam access door. 3. On the left side of the product, disconnect one flat, flexible cable (callout 1) from the formatter. Figure 1-23 Remove the top-cover assembly (1 of 3) 1 18 Chapter 1 Removal and replacement ENWW