Transfer roller WARNING! The transfer roller bar has grease on its surface. Wear a thin glove, like an ESD glove, to keep the grease off your skin. 1. Open the print-cartridge door. 2. Unlatch the blue latch on the right (callout 2), and then lift up the transfer roller on the left side of the product (callout 1) to remove it. Figure 1-22 Remove the transfer roller 1 2 and latch on the right side of the product. 16 Chapter 1 Removal and replacement ENWW NOTE: Do not touch the rubber sponge on the transfer roller. NOTE: When you reinstall the transfer roller, snap it into the left side of the product first, and then install