Table 1: FRM (Field Replaceable Module) List Part No. CQ114-90035 Rev B HP Scitex FB500 / FB700 Service Manual Page 18 of 510 Part # Part Name Type Description Page CQ114-67008 FRM,CARR CAMERA/ _ CASE/CABLES,U Carr This is the carriage camera (image sensor) assembly and cables, with metal housing. See CQ114-67013 for the camera/cables only. Common to 500-700. page 233 CQ114-67009 FRM,CARR HOME SNSR/ _ _ BRKT/CBL,U Carr This is the carriage home sensor, mounting bracket, and cable. It does not include the flag attached to the rail, see 0507774. Com- mon to 500-700.
page 249 CQ114-67010 FRM,CARR MANIFOLD A _ _ SSY,U Carr This is the air valve/manifold assembly that mounts on the rear of the carriage above the trolley. Common to 500-700. page 238 CQ114-67011 FRM,3 THERM ASSY,U _ _ Carr This is an assembly of the three thermistors pre-installed into the top half of the ink reservoir. It includes a new O-ring for the reservoir. Six assemblies are used per printer; this FRM is for qty. 1. Common to 500-700. page 235 CQ114-67012 FRM,HEADBOARD,U Carr This is the headboard assembly for FB500-FB700. It includes the protective bracket and all related hardware.
page 231 CQ114-67013 FRM,CAMERA/ FLEX CBLS,U _ Carr This is the camera (image sensor) assembly and cables only. Com- mon to 500-700. page 233 CQ114-67014 FRM,TROLLEY,U Carr This is the complete trolley assembly (upper and lower plates). Common to 500-700. CQ114-67015 FRM,UPPER TROLLEY,U _ Carr Upper trolley plate with wheels. Common to 500-700. page 246 CQ114-67016 FRM,CARR,OVERFILL FLTER _ ASSY,U _ Carr This is the overfill filter and tubing assembly. Six are used on the printer, this FRM is qty 1. Common to 500-700. CQ114-67017 FRM,CARR,SRVC,LAMP M _ ODULE,U Carr This is the service-side lamp housing for FB500. It does not include a bulb.
page 252 CQ114-67018 FRM,CARR,USER,LAMP M _ ODULE,U Carr This is the user-side lamp housing for FB500. It does not include a bulb. page 251 CQ114-67019 FRM,PRINTHEAD ONLY,U _ Carr This is the printhead for FB500/FB700. It includes replacement O- rings and fasteners. Twelve are used per printer; this FRM is for qty. 1 page 224 CQ114-67020 FRM,CARR,PH,Y AXIS ALI _ _ GNMT BAR ASSY,U _ _ Carr This is the bar with adjustment screws to control the Y-axis align- ment of the printheads on the carriage. Common to 500-700. CQ114-67021 FRM,CARRIAGE COVER,U _ Carr This is the carriage cover for FB500/FB700.
page 224 CQ114-67022 FRM,FB500,CARR BELT/ _ CLIP,ASSY Carr This is the main carriage belt (blue belt) for FB500. It includes the metal clips that attach to the belt and secure the belt to the car- riage. page 260 CQ114-67023 FRM,MEDIA OUT DETECT _ _ SNSR,QU _ Med Drv This is the optical media-out detection sensor found on the input side of the printer. Two are used on the printer, one at center and one at the user end; this FRM is for qty. 1. Commonly used in the 500-700, and the FB950.
page 328 CQ114-67024 FRM,FB500,MULTI CBL LO _ _ OM,SERVICE SIDE _ Elec This is the cabling loom (conduit and cables) for cables that pass between the electronics assembly to components on the service end of the FB500 printer. Only the loom bundle is available, the individual cables are not orderable. CQ114-67025 FRM,FB500,MULTI CBL LO _ _ OM,USER SIDE _ Elec This is the cabling loom (conduit and cables) for cables that pass between the electronics assembly to components on the user end of the FB500 printer, excluding devices in the user-end removable enclosure. Only the loom bundle is available, the individual cables are not orderable.