Table 1: FRM (Field Replaceable Module) List Part No. CQ114-90035 Rev B HP Scitex FB500 / FB700 Service Manual Page 30 of 510 Part # Part Name Type Description Page CQ115-67040 FRM,FB700,AC DISTRB,UV _ PS,CBL _ Elec This cable provides the power from the AC distribution board to the UVPS. One wire goes to the UVPS, the other wire goes to the AC Relay. Cable label is CQ115-50011. Unique to FB700. See CQ114-67034 for similar cable in FB500. CQ115-67041 FRM,FB700,RELAY,UV PS, _ CBL Elec This cable goes between the AC Relay and the two UV Power Sup- plies in the FB700 electronics assembly.
Cable label is CQ115- 50012 CQ115-67042 FRM,FB700,EBOX,UV PW _ R OUTPUT,CBL _ Elec Cable and external connector for the track UV power cables. Inter- nal connection to both the UVPS to cable harness CQ115-50014 from the I/O board. Two instances of this cable are used per printer; this FRM is for qty. 1. Cable label is CQ115-50013 CQ115-67043 FRM,FB700,EBOX INTERN _ AL,CBL Elec Cable from the back of the I/O board (J28) to many internal com- ponents, including the ebox fans, on/off switch, UVPS cable con- nect sense. and foot switch. Cable label is CQ115-50014. Unique to 700. See CQ114-67099 for similar cable in FB700.
CQ115-67044 FRM,FB700,EBOX INTERN _ AL,CBL Elec Cable from the back of the I/O board (J28) to many internal com- ponents, including the ebox fans, on/off switch, UVPS cable con- nect sense. and foot switch. Cable label is CQ115-50014. Unique to 700. See CQ114-67099 for similar cable in FB700. CQ115-67045 FRM,FB700,RAW,CENTER INPUT COVER _ _ Encl Center input-side cover for FB700. This is the sheet metal enclosure only, nothing else. CQ115-67047 FRM,CARR,LEFT/ SRVC,LAMP MODULE,QU _ Carr Service-side lamp housing for FB700 and FB950 only. Replaces CJ852A for the FB950. Does not include bulb. See CQ114-67017 for the corresponding FB500 part.
CQ115-67048 FRM,CARR,RIGHT/ USER,LAMP MODULE,QU _ Carr User-side lamp housing for FB700 and FB950 only. Replaces CJ853A for the FB950. Does not include bulb. See CQ114-67018 for the corresponding FB500 part. CQ115-67049 KIT,FB700,REPACKAGING Misc Repackaging kit for FB700 printer. Includes the carriage restraint (CQ114-67002) and instructions. CQ115-67051 FRM,FOAM TAPE,IGUS TR _ _ AY Track This is a 69-inch (175 cm) length of the foam tape found on top of the rail that cushions the track assembly (Igus). This is the neces- sary length for any 98" (2.5 m) printer, but may be cut down to shorter lengths for use on other machines.
CQ115-67052 FRM,FB700,CAR BELT/ _ CLIP,ASSY,SIZED Carr Drv Main carriage belt (blue belt) for FB700. Includes the metal clips that attach to the belt and secure the belt to the carriage. This part replaces CQ115-67003. CQ115-67053 FRM,FB700,FULL IGUS,ALT _ Track Complete track (Igus) assembly for FB700 only, with all tubes, cables, and related hardware. This FRM is for repairing a printer that already has the "ALT" Igus, not for a printer with the "ORG" Igus. CQ115-67054 FRM,FB700,IGUS,4 INK T _ _ UBE Track Bundle of four ink tubes (CMYK) for replacement in the "ALT" Igus assembly only. For FB700 only.
CQ115-67055 FRM,FB700,IGUS,2 INK- _ 2 AIR TUBE _ _ Track Bundle of two ink tubes (lm-lc/white) for replacement in the "ALT" Igus assembly only. For FB700 only.