en Cleaning and servicing 13.2 Cleaning the appliance 6. Putting the food into the appliance. WARNING Risk of electric shock! An ingress of moisture can cause an electric shock. ▶ Do not use steam- or high-pres- 13.3 Cleaning the condensa- tion channel and drain- age hole Regularly clean the condensation channel and drainage hole to ensure that the condensation can drain. ▶ Carefully clean the condensation sure cleaners to clean the appli- ance. Liquid in the lighting or in the con- trols can be dangerous. ▶ The rinsing water must not drip channel and the drainage hole, e.g. using a cotton bud. into the lighting or controls. ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appli- ance. ▶ Do not use hard scouring pads or cleaning sponges. ▶ Do not use harsh or abrasive de- tergents. ▶ Do not use cleaning products with a high alcohol content. If liquid gets into the drainage hole, the evaporation pan may overflow. ▶ The rinsing water must not get into 13.4 Removing the fittings the drainage hole. If you clean fittings and accessories in the dishwasher, this may cause them to become deformed or discol- our. ▶ Never clean fittings and accessory If you want to clean the fittings thor- oughly, remove these from your ap- pliance. Removing the shelf ▶ Lift the shelf at the front , pull it in the dishwasher.
1. Prepare the appliance for cleaning. → Page 19 2. Clean the appliance, the fittings, the accessories and the door seals with a dish cloth, lukewarm water and a little pH-neutral washing-up liquid. 3. Dry thoroughly with a soft, dry cloth. 4. Insert the fittings and install the ap- pliance components. 5. Electrically connect the appliance. → Page 11 20 out a nd remove it .