en Before using for the first time 2. Set the slider to ON or OFF. 5. Place the Extra Clean Zone in the top basket and lock in place . 3. Push in the top basket. Cleaning Extra Clean Zone Limescale and soiling from the dish- washing water can block the nozzles. Note: Always operate the appliance with the Extra Clean Zone fitted. Check that the mounts are in the correct position. a The Extra Clean Zone audibly clicks into position . 6. Push in the top basket. 1. Pull out the top basket. 2. Pull the tab on the Extra Clean Before using for the first time 9 Before using for the Zone up and forwards .
first time Before using for the first time 9.1 Performing the initial con- figuration On initial start-up or after a reset to the factory settings, you will need to make settings. Tip: Connect your appliance to a mo- bile device. You can conveniently change all settings via the Home Connect app. Requirement: The appliance has been installed and connected. → Page 12 3. Set the slider to ON. 4. Clean under running water. 1. Add special salt. → Page 28 2. Add rinse aid. → Page 29 3. Switch on the appliance. → Page 35 4. Setting the water softening system. → Page 27 5. Set the amount of rinse aid to be dispensed. → Page 30 26