Before using for the first time en Before using for the first time 9 Before using for the 5. Press or repeatedly until the display shows the right value. You can change several settings. 6. To save the settings, press for approx. 3 seconds. 7. Add detergent → Page 31 . 8. Start the Programme with the first time Before using for the first time 9.1 Performing initial start-up On initial start-up or after a reset to the factory settings, you will need to make settings. The display shows the settings for initial start-up. Tip: Connect your appliance to a mo- bile device. You can conveniently change all settings via the Home Connect app. Requirement:
The appliance has been installed and connected. → Page 12 highest cleaning temperature without tableware. To remove any marks from water or other residues, we recommend you operate the appliance without tableware before using it for the first time. Water softening system 10 Water softening sys- tem 1. Add special salt. → Page 28 2. Add rinse aid. → Page 30 3. Switch on the appliance. a The display shows the settings for Water softening system Hard water leaves limescale on the tableware as well as the washing tank, and parts of the appliance may become blocked. To ensure good dishwashing results, you can treat the water with special salt and the water softening system.
To avoid damage to the appliance, water with a hardness above 9 °E must be softened. initial start-up. 4. Press repeatedly until the display shows the required setting. Note: If you select Initial start-up Home Connect here, make further settings using the Home Connect app on your mobile device. You can change the settings for initial start-up and other Basic set- tings → Page 38 on the appliance at any time or use the Home Con- nect app on your mobile device. 10.1 Overview of water hardness settings You can find an overview of the water hardness values that can be selected here. You can find out how hard your water is from your local water company or by using a water hardness tester.
Water hardness °E Hardness range mmol/l Setting value 0 - 8 Soft 0 - 1.1 0 - 8 9 - 10 Soft 1.2 - 1.4 9 - 10 27