Finding Locations Finding a Location Using Coordinates 4 Select an option: Before you can find a location using coordinates, you must add a shortcut to the coordinates search tool ( page 13 ). • Select a location marker. • Select a point, such as a street, intersection, or address location. You can find a location using latitude and longitude coordinates. This can be helpful when geocaching. 5 If necessary, select the location description to view additional information. 1 Select Where To? > Coordinates. Find a Location Using Quick Search 2 If necessary, select > Format, select the correct coordinate format for the type of map you are using, and select Save.
After you have performed a search for a point of interest, certain categories may display a Quick Search list that displays the last four destinations you selected. 3 Select the latitude coordinate. 1 Select Where To?. 4 Enter the new coordinate, and select Done. 2 Select a category, or select Categories. 5 Select the longitude coordinate. 3 If applicable, select a destination from the Quick Search list ➊ . 6 Enter the new coordinate, and select Done. 7 Select View on Map. Finding a Location by Browsing the Map ➊ Before you can find places included in the map data, such as restaurants, hospitals, and fuel stations, you must enable the map layer for places along the road ( page 23 ).
4 If necessary, select the appropriate destination. 1 Select View Map. 2 Drag and zoom the map to display the area to search. Saving a Home Location 3 If necessary, select , and select a category icon to view only a specific category of places. You can set your home location for the location you return to most often. 1 Select Where To? > > Set Home Location. Location markers ( or a blue dot) appear on the map. 2 Select Enter My Address, Use My Current Location, or Choose from Recently Found. The location is saved as “Home” in the Saved menu. 16 GPS Navigation Instruction Manual