L-4733A/L-4733AW Operation Guide Overview of the Product Unusable substrate The following substrates cannot be used. ❏ Metallic luster or black faces, and transparent separators ❏ Metallic luster or black separators ❏ Multi-layer substrates in which the layers are not fixed with adhesive (cylindrical substrates, substrates with adhesive applied to some areas, substrates with an adhesive side, and so on) Substrates that need to be checked before use Use the following substrates after checking them in advance.
❏ Dark or light colored separators ❏ Separators with logos and so on ❏ Separators with weak adhesive qualities, or for which the adhesive strength decreases at 75˚C ❏ Film faces and separators with splits on the back ❏ Substrates for which the expansion and contraction rate for the face and separator differs at 75˚C (the face is made of PET or PP and the separator is glassine paper, and so on) Storage environment for substrate Store substrate in the following environment (including storage environment before you start printing). ❏ Comply with the storage environment conditions indicated by the manufacturer of the substrate. ❏ After opening the substrate, store it in a PE bag. ❏ Material:
LDPE (low density polyethylene) ❏ Thickness: 0.03 mm or more ❏ If substrate is wrapped in individual PE bags when it is delivered, you can use these to store the substrate. 30 Joining Tested tape thickness: 25μm (both sides) Do not overlap the substrate at the joined section. Tensile strength At least 2,100 N/m