BODY PANEL REPLACEMENT RE-18 CENTER BODY PILLAR (CUT) REMOVAL Cut and Join Location (Cut Location for Supply Parts) [Cut and Join Location] 50 mm 150 mm 140 mm Cut and Join Location Cut and Join Location [Cut and Join Locations] 50 mm 50 mm 1. Cut and join the parts at the locations as shown above. 3. Cut and join the rocker outer panel and rocker panel reinforcement at position shifted about 50 mm (1.97 in.) 2. Cut and join the outer pillar and pillar reinforce- ment at position shifted about 50 mm (1.97 in.) mm in. 50 140 150 1.97 5.51 5.91