(a) Install the mounting insulator with the 4 bolts. Torque: 59 N·m {600 kgf·cm, 43ft·lbf} HINT: Install the insulator rear with the inscribing mark facing backward. gn 7. INSTALL CROSSMEMBER AND TRANSFER CASE PROTECTOR (a) Install the crossmember with the 8 bolts and 2 nuts. Torque: 50 N·m {510 kgf·cm, 37ft·lbf} for bolt 74 N·m {750 kgf·cm, 54ft·lbf} for nut (b) Install the transfer case protector with the 3 bolts. Torque: 29 N·m {296 kgf·cm, 21ft·lbf} 8. CONNECT GROUND CABLE (a) Install the ground cable with the bolt. 9. CONNECT OIL COOLER TUBE (a) Loosely install the tip of the oil cooler tubes to the automatic transmission by hand. (b) Install the clamp with the bolt. Torque:
12 N·m {122 kgf·cm, 9ft·lbf} (c) Using SST, tighten the tubes. SST: 09023-12701 Torque: 34 N·m {346 kgf·cm, 25ft·lbf} for use without SST 31 N·m {316 kgf·cm, 23ft·lbf} for use with SST 10. INSTALL DRIVE PLATE AND TORQUE CONVERTER CLUTCH SETTING BOLT (a) Hold the crankshaft pulley bolt with a wrench and install the 6 torque converter clutch setting bolts. Torque: 48 N·m {490 kgf·cm, 35ft·lbf} HINT: First install the green colored bolt. (b) Install the hole plug with the bolt. Torque: 18 N·m {185 kgf·cm, 13ft·lbf} cardia