Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001BL2000X agn Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: 2UZ-FE COOLING: FAN: REMOVAL; 2006 MY Land Cruiser [05/2005 - ] REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. 2. REMOVE NO. 1 ENGINE UNDER COVER 3. DRAIN ENGINE COOLANT 4. DRAIN AUTOMATIC TRANSMISSION FLUID (a) Drain automatic transmission fluid . 5. REMOVE NO. 1 RADIATOR HOSE 6. REMOVE RADIATOR RESERVOIR ASSEMBLY (a) Disconnect the clamp on the wire from the radiator.
(b) Disconnect the reservoir hose from the radiator. (c) Remove the 2 bolts, reservoir and grommet. 7. REMOVE FAN WITH FLUID COUPLING (a) Remove the 2 nuts, and disconnect the 2 clamps on the A/C discharge tube from the 2 wire harness brackets. (b) Remove the 2 bolts, and disconnect the 2 wire harness brackets from the radiator. (c) Disconnect the 2 oil cooler hoses from the clamp on the fan shroud. (d) Loosen the 4 fan pulley mounting nuts holding the fluid coupling to the fan bracket. (e) Remove the drive belt . (f) Remove the 3 bolts holding the fan shroud to the radiator. (g) Remove the 4 fan pulley mounting nuts. (h) Pull out the fan with fluid coupling, fan pulley and fan shroud.
NOTICE: Be careful not to damage the radiator core. 8. REMOVE FAN cardi