Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM0000018UL000X agn Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: INTRODUCTION: REPAIR INSTRUCTION: CUSTOMIZE PARAMETERS; 2006 MY Land Cruiser [05/2005 - ] CUSTOMIZE PARAMETERS HINT: The following can be customized. NOTICE: When the customer requests a change in a function, first make sure that the function can be customized. Be sure to make a note of the current settings before customizing. When troubleshooting a function, first make sure that the function is set to the default setting. 1.
POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM TILT AND TELESCOPIC ECU DISPLAY (ITEM) DEFAULT CONTENTS SETTING AUTO TILT AWAY (#) (Auto Away / Return Function) ON ON / OFF of the Auto away / return function. ON / OFF 2. THEFT DETERRENT SYSTEM THEFT DETERRENT SYSTEM DISPLAY (ITEM) DEFAULT CONTENTS SETTING PASSIVE MODE (Passive Mode) OFF PASSIVE MODE is the function to set the theft deterrent system 30 seconds after having the driver's door closed from opening condition by removing the key from the ignition key cylinder.
In PASSIVE MODE, under the condition that the theft deterrent system is set and after opening either one of the doors, if you do not perform the following operations within 15 seconds, the theft deterrent system will operate by judging the condition as a theft. Press the transmitter unlock button. Insert the key into the door key cylinder on the driver's or the passenger's door and turn it to the unlock side. Insert the key to the ignition key cylinder and turn the ignition switch ON. Open the trunk with the transmitter. Open the trunk with the key. ON / OFF WARNING (HORN) (#) (Warning (horn)) ON Function to make the warning by the vehicle horns and security horn available.
ON / OFF ENTRY DELAY (#) (Entry delay time) 14 s Function to change the entry delay time (period before starting the warning) by the passive mode. 0 s / 14 s / 30 s WARN BY GLS SEN (#) (Warning by glass breakage sensor) ON Function to turn ON / OFF the glass breakage sensor. This function is only for vehicles with a glass breakage sensor. ON / OFF INTRUSION SEN (#) (Intrusion Sensor) ON Function to turn ON / OFF the intrusion sensor. This function is only for vehicles with an intrusion sensor. ON / OFF 3. LIGHTING SYSTEM LLUMINATED ENTRY DISPLAY (ITEM) DEFAULT CONTENTS SETTING LIGHTING TIME (Lighting Time) 15 s Function to change the lighting time after closing the door.
It will quickly fade out when turning the ignition switch ON. 7.5 s / 15 s / 30 s I/L ON / UNLOCK (Interior light ON w/ door key unlock) ON Function to light up the interior light*, ignition light and step light when unlocking with the door key cylinder. *: Interior light comes on when the interior light switch is in the DOOR position. ON / OFF I/L ON/ACC OFF (Illumination system with ACC ON Function to light the interior light* and door courtesy light when the ignition switch is operated from ACC to LOCK. ON / OcFaFrdi