Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001891000X agn Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: 2UZ-FE CHARGING: GENERATOR: REASSEMBLY; 2006 MY Land Cruiser [05/2005 - ] REASSEMBLY 1. INSTALL GENERATOR ROTOR ASSEMBLY (a) Place the drive end frame on the pulley. (b) Install the rotor to the drive end frame. 2. INSTALL GENERATOR COIL ASSEMBLY (a) Place the generator washer on the rotor. (b) Using SST and a press, slowly press in the coil assembly. SST: 09285-76010 (c) Install the 4 bolts. Torque: 5.8 N·m {59 kgf·cm, 51in·lbf} 3. INSTALL GENERATOR PULLEY (a) Install the pulley to the rotor shaft by tightening the pulley nut by hand.
(b) Hold SST (A) with a torque wrench, and tighten SST (B) clockwise to the specified torque. SST: 09820-63011 Torque: 39 N·m {400 kgf·cm, 29ft·lbf} (c) Check that SST (A) is secured to the pulley shaft. cardi