Fluid temperature: 80°C(176°F) gn (e) Check for foaming or emulsification. If there is foaming or emulsification, bleed air from the power steering system. (f) With the engine idling, measure the fluid level in the oil reservoir. (g) Stop the engine. (h) Wait a few minutes and remeasure the fluid level in the oil reservoir. Maximum fluid level rise: 5 mm (0.20 in.) If a problem is found, bleed air from the power steering system. (i) Check the fluid level. 4. CHECK STEERING FLUID PRESSURE (a) Remove the air cleaner assembly with air cleaner hose . (b) Disconnect the pressure feed tube from the vane pump . (c) Connect SST, as shown in the illustration below. SST:
09640-10010 09641-01010 09641-01030 09641-01060 NOTICE: Check that the valve of the SST is in the open position. (d) Bleed air from the power steering system. (e) Start the engine and run it at idle. (f) Turn the steering wheel from lock to lock several times to boost fluid temperature. Standard fluid temperature: 80°C (176°F) cardia