(3) Press the preset switch ''1'' to perform the service check again, and check that no DTCs are displayed for all of the component codes (physical address). (c) Finishing diagnostic mode (1) Press the ''DISC'' switch for 2 seconds or more, or turn the ignition switch OFF. 3. CHECK DIAGNOSTIC CODE (SUB AVC-LAN) (a) Starting diagnostic mode (1) If the Main AVC-LAN starts running diagnostic mode, the sub AVC-LAN automatically starts running diagnostic mode. Perform the diagnostic mode operation on the stereo component controller assembly panel. (b) Service check screen (1) Press the "TUNE UP" switch to enter the "Service Check Screen".
(2) In the service check mode, the system check and diagnostic memory check are performed, and the physical address (component code) check results are displayed in the numerical order. agn TERMS MEANING Physical address (component code) Three-digit code (in hexadecimals) given to each component of AVC-LAN. Individual symbol is provided corresponding to each function. Logical address Two-digit code (in hexadecimals) given to each function and component unit in each component of AVC-LAN. Code No. (physical address) list CODE NO.
(PHYSICAL ADDRESS) EQUIPMENT NAME 1A0 Disc player changer (DVD Auto Player) (c) Finishing diagnostic mode (1) The finishing diagnostic mode is the same as Main AVC-LAN. (d) Service check mode result display (for checking the current and the past system conditions) (1) Press the "TUNE TRACK" switch to see the check result of each component. cardi