Chapter 3 Software Operation ◎ Setup Provide all internal settings of the laser displacement, the following shows the setting options according to the application. Device Address, Baud Rate, Communication Format Device address and baud rate needs to be setup at the same time, press the button of address change and the button of baud rate after setting is completed. For example: device 1 is changed to device 2 and the baud rate changed from 115200 to 38400. Communication Format For example: select the current device address and the desired communication format, then press “write”. ◎ Response Time Setting After selecting the current device address, you can read or set the response speed.
◎ Filter Setting & Power reset after setting After selecting the station number, you can set the size of the median filter and the average number of times. After writing, please resend the power and the parameters will be written into the firmware. Laser Displacement Operating Manual 3-4