Chapter 3 Software Operation ◎ Average Setting First, select current device address. Then, click Average Times that needs to be changed and click Average Setting . ◎ Do Setting Comparator The comparator provides absolute position setting and relative position setting. Whenever there is a homing action, comparator output will automatically switch to relative position setting. If you need to switch to absolute position, you need to reset the zero point or resend power. 1) Absolute Position Comparator Set the upper and lower limits of the absolute position. When the object to be tested is in this range, the signal will be output.
2) Relative Position Comparator As mentioned above, relative position comparator must be zeroed before it is executed. Also, when the object to be tested is in this range, the signal will be output. Laser Displacement Operating Manual 3-5