INTRODUCTION - General Repair Instructions IN-11 Proper and Efficient Work Procedures REMOVAL PRE-REMOVAL MEASURING Before removal or cutting operations, take measurements in accordance with the dimen- sion diagram. Always use a puller to straighten a damaged body or frame. NUMBER OF SPOT WELDS AND PANEL POSITIONS The number of spot welds and the panel positions to be removed are shown for your reference. HINT: See ”Symbols” on page IN-4,5. REMOVAL OF ADJACENT COMPONENTS When removing adjacent components, apply protective tape to the surrounding body and your tools to prevent damage. HINT: See ”Handling Precautions on Related Components” on page IN-6.
PRECAUTIONS FOR DRILLING OR CUTTING Check behind any area to be drilled or cut to insure that there are no hoses, wires, etc., that may be damaged. HINT: See ”Handling Precautions on Related Components” on page IN-6. CUTTING AREA Always cut in a straight line and avoid reinforced area. Cutting Okay Reinforcement Corners WRONG LX470 12