− INTRODUCTION FOR ALL OF VEHICLES IN−19 (e) On−Vehicle Wheel Balancing When doing on−vehicle wheel balancing on a full−time 4WD vehicle, to prevent the wheels from rotating at differ- ent speeds in different directions from each other (which could damage the center differential), always be sure to observe the following precautions: (1) All 4 wheels should be jacked up, clearing the ground completely. (2) Put the center differential in LOCK position. (3) The parking brake lever should be fully released. (4) None of the brakes should be allowed to drag. (5) The wheels should be driven on the wheel balancer with the engine running. HINT:
When doing this, be careful of the other wheels, which will rotate at the same time. (6) Avoid sudden acceleration, deceleration and brak- ing. (7) Carry out the wheel balancing with the transmission in D position. B04218 19 Author : Date: