Note This section refers to the MFP only. See the HP LaserJet 4100 series printer service manual for printing specifications, or see the Print Media Guide for the HP LaserJet printer family for general 18 Product Information C9148-90909 G Documents must be square or rectangular and in good condition (not fragile or worn). G letter- or A4-size and smaller originals, books, manuals, receipts, and similar documents Letter 216 by 279 mm (8.5 by 11 inches) 50 to 105 g/m 2 (13 to 28 lb) 60 to135 g/m2 (16 to 36 lb) G irregular and worn documents, stapled documents, and photographs Size Dimensions Weight Table 5.
Supported paper sizes and weights for the ADF Special considerations for ADF documents G Documents must be free of glue, correction fluid, or wet ink. G Remove sticky notes, tape flags, staples, and paper clips. The glass can accommodate the following types of media: G Documents must be free of tears or perforations. A4 210 by 297 mm (8.3 by 11.7 inches) Legal 216 by 356 mm (8.5 by 14 inches) Custom sizes Minimum: 148.5 by 210 mm (5.9 by 8.3 inches Maximum: 215.9 by 355.6 mm (8.5 to 14 inches) G Multipart forms cannot be used in the ADF. Supported media for the glass G multiple-page letter-size documents Media specifications requirements.
Size Dimensions Weight Letter 216 by 279 mm (8.5 by 11 inches) 50 to 105 g/m2 (13 to 28 lb) A4 210 by 297 mm (8.3 by 11.7 inches) Legal 216 by 356 mm (8.5 by 14 inches) Custom sizes Minimum: 148.5 by 210 mm (5.9 by 8.3 inches Maximum: 215.9 by 355.6 mm (8.5 to 14 inches) 60 to135 g/m2 (16 to 36 lb)