STARTING AND DRIVING ■ When the vehicle speed is lower than 30 km/h and the set key is pressed, ACC will be enabled, and the initial cruise speed is set to 30 km/h. ■ When the vehicle speed is higher than 30 km/h and lower than 150 km/h and the set key is pressed, ACC will be enabled, and the initial cruise speed is set as the current vehicle speed. VESPER : No target vehicle is detected ahead. Note! Putting ACC in standby mode will not enable it. ACC can only be enabled by pressing the set key. : A target vehicle is detected ahead when ACC is activated.
Enable Adaptive Cruise Control (ACC) Adjusting speed for Adaptive Cruise Control (ACC) By pressing the left/right selection key on the left keypad of the steering wheel to switch the driver support function to ACC, and ACC enters in standby mode. Different cruise speeds can be set after ACC is activated: ■ Press and release the acceleration/deceleration key on the left keypad of the steering wheel, to increase/decrease the vehicle When ACC is in standby mode: 191