BS EN 55035:2017 CISPR 35:2016 Electromagnetic compatibility of multimedia equipment — Immunity Requirements 1 Scope NOTE Blue coloured text within this document indicates text aligned with CISPR 32. CISPR 32 contains the appropriate emission requirements above 150 kHz for the equipment within the scope of this document. This document applies to multimedia equipment (MME) as defined in 3.1.24 and having a rated AC or DC supply voltage not exceeding 600 V. For MME that falls within the scope of EN 300 386 or any part(s) of EN 301 489 series, the requirements within these product specific/product family standards take precedence over the requirements within this document.
MME with a broadcast reception function is within the scope of this document, see Annex A . MME with non-broadcast wireless interfaces is also within the scope of this document, however, compliance with this document does not require the assessment of the performance of these interfaces. MME intended primarily for professional use is within the scope of this document. MME for which immunity requirements in the frequency range covered by this document are explicitly formulated in other CISPR documents (except CISPR 20 and CISPR 24) are excluded from the scope of this document. The objectives of this document are:
to establish requirements which provide an adequate level of intrinsic immunity so that the MME will operate as intended in its environment in the frequency range 0 kHz to 400 GHz; to specify procedures to ensure the reproducibility of tests and the repeatability of results. Due to technology convergence of the functions of MME, the performance criteria have been determined on a function-orientated basis rather than on an equipment-orientated basis. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any amendments) applies. CISPR 16-1-2:2014, Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-2: Radio disturbance and immunity measuring apparatus — Coupling devices for conducted disturbance measurements IEC 61000-4-2:2008, Electromagnetic compatibility (EMC) — Part 4-2: Testing and measurement techniques — Electrostatic discharge immunity test IEC 61000-4-3:2006, Electromagnetic compatibility (EMC) — Part 4-3:
Testing and measurement techniques — Radiated, radio-frequency, electromagnetic field immunity test IEC 61000-4-3:2006/AMD 1:2007 IEC 61000-4-3:2006/AMD 2:2010 IEC 61000-4-4:2012, Electromagnetic compatibility (EMC) — Part 4-4: Testing and measurement techniques — Electrical fast transient/burst immunity test 1