BS EN 55035:2017 CISPR 35:2016 3.1.3 antenna port port, other than a broadcast receiver tuner port ( 3.1.8 ), for connection of an antenna used for intentional transmission and/or reception of radiated RF energy 3.1.4 arrangement physical layout and orientation of all the parts of the EUT, AE and any associated cabling, located within the test area 3.1.5 associated equipment AE equipment needed to exercise and/or monitor the operation of the EUT Note 1 to entry: The AE may be either local (within the measurement or test area) or remote.
3.1.6 audio equipment equipment which has a primary function of either (or a combination of) generation, input, storage, play, retrieval, transmission, reception, amplification, processing, switching or control of audio signals 3.1.7 broadcast receiver equipment equipment containing a tuner that is intended for the reception of broadcast services Note 1 to entry: These broadcast services are typically television and radio services, including terrestrial broadcast, satellite broadcast and/or cable transmission.
3.1.8 broadcast receiver tuner port port intended for the reception of a modulated RF signal carrying terrestrial, satellite and/or cable transmissions of audio and/or video broadcast and similar services Note 1 to entry: This port may be connected to an antenna, a cable distribution system, an RF modulator output port ( 3.1.31 ) or similar device. 3.1.9 common mode impedance asymmetrical mode (see CISPR 16-2-1:2014 ) impedance between a cable attached to a port and the Reference Ground Plane (RGP) Note 1 to entry: The complete cable is seen as one wire of the circuit, and the RGP is seen as the other wire of the circuit.
The common mode current flowing around this circuit can lead to the emission of radiated energy from the EUT. 3.1.10 configuration operational conditions of the EUT and AE, consisting of the set of hardware elements selected to comprise the EUT and AE, the mode of operation ( 3.1.23 ) used to exercise the EUT and arrangement ( 3.1.4 ) of the EUT and AE 3.1.11 converted common mode current asymmetrical mode current converted from differential mode current by the unbalance of an attached cable and/or network 3