Nov.2002 fig.230c fig.230f Voltage area :230V EU,230V E or 240V A Turn off the power of the MC-909. Voltage area :230V EU,230V E or 240V A Verify that the lower left of the LCD display shows as follows If the destination region has not been set, the LCD display will show as follows, and the destination region select screen will appear. Voltage area display 117V U or 117V U/CS: 117V fig.test173 230V EU,230V E or 240V A: 230/240V When factory reset is completed, the LCD display will show as follows, and you will exit Test mode. fig.117c Use the [CURSOR] up/down buttons to select "100V" and press the [ENTER] button.
The LCD display will show as follows, and factory reset will be executed automatically. fig.117f Voltage area :117V U or 117V U/CS fig.230c Voltage area :117V U or 117V U/CS Voltage area :230V EU,230V E or 240V A Turn off the power of the MC-909. Changing the destination region The settings of the MC-909 differ according to the destination region. There are three possible settings. The order of the preset patterns will differ according to the destination region. 30