en Citrus press attachment 10. Hold down the release button and turn the attachment clockwise until it disengages. 11. Remove the attachment, take it apart Use X Sequence of figures K 1. Cut the citrus fruits in half. 2. Place a suitable container under the and clean all parts. X “Care and daily cleaning” see page 23 attachment. 3. Connect the mains plug. Switch on the Citrus press attachment appliance. The drive is running. 4. Position the halved citrus fruits with For squeezing juice out of citrus fruits, e.g. lemons, oranges, grapefruits. the cut surface on the pressing cone and press down. As soon as the fruit is pressed onto the pressing cone, the cone will rotate. 5.
To finish the process, reduce the Preparation W W Warning Risk of injury! The attachment for the citrus press is directly assembled on the base unit. Do not insert the mains plug until all preparations for working with the appliance are complete. pressure on the cone. 6. Once you have finished, switch off the appliance and pull out the mains plug. 7. Hold down the release button and turn the attachment clockwise until it disengages. 8. Remove the attachment, take it apart Caution! The base unit is moved through 90° for preparation and use of the citrus press attachment. Never use other attachments in this position. and clean all parts. X “Care and daily cleaning” see page 23 Notes:
– – To obtain the largest amount of juice, the pressing procedure should be repeated a few times. – – The filter insert with the pulp and pips should be emptied as necessary. X Sequence of figures J 1. Hold the base unit by the carrying handle and carefully tip up so the drive points upwards. Possibly turn the base unit to make the buttons easily accessible. 2. Insert the driving shaft with the spring element pointing down in the drive of the base unit. Caution! It should be possible to push the driving shaft down lightly with your finger. It must not get sticky with residue from juice or become blocked with pips or foreign bodies. 3.
Fit the collecting tray onto the drive at Care and daily cleaning The appliance, all attachments and the relevant accessories must be thoroughly cleaned after each use. W W Warning Risk of electric shock! – – Disconnect the mains cable from the socket prior to cleaning. – – Never immerse the base unit in liquids and do not clean in the dishwasher. Risk of injury! Do not reach into the sharp blades and edges of the shredding and slicing inserts. an angle. 4. Turn the collecting tray anticlockwise until you hear it click into position. 5. Fit the filter insert onto the collecting tray. 6. Fit the pressing cone onto the driving shaft.
The citrus press attachment is now fitted to the base unit and prepared. 23 MFW3_EU_8001019358.indb 23 01.12.2015 12:05:48