Using the Mopping Function 3. Install the mopping assembly To install the mopping assembly, slide it into the back of the vacuum-mop until it clicks into place. 1. Install the mop pad Dampen the mop pad and wring out excess water. Slide the pad all the way into the slot of the water tank until it is securely in place. 4. Start mopping Press the button or use the Mi Home/Xiaomi Home app to start the cleanup. The vacuum-mop will automatically recognize the mopping assembly and begin mopping and dispensing water as needed. 2. Fill the water tank Open the water tank lid, fill the tank with water, then securely close the lid. Notes: · Only use the mopping mode when someone is at home.
To prevent the vacuum from entering carpeted areas, objects may be used. · The mop pad should be cleaned after every 30 minutes of use to ensure adequate water flow and cleaning effectiveness. 5. Remove the mopping assembly After the vacuum-mop finishes cleaning and returns to the charging dock, press the side clips of the mopping assembly inward and pull to remove the assembly. Notes: · Do not add hot water to the water tank, as this may cause the tank to become deformed. · To avoid clogging, do not add any cleaning agents or disinfectants to the water tank. Note: When the vacuum-mop is charging or not in use, remove the mopping assembly.
Pour out all remaining water in the tank, and clean the mop pad to prevent mildew or lingering odors. 11