No. 20S125-00 Page 2 PAGE 1 2 3 4 5 6 WB MODE AUTO R GAIN B GAIN SHARPNESS H03 V03 CORING 02 1) WB MODE Selects the white balance mode from below two modes. (Default: AUTO). a) AUTO The auto white balance operation. b) MANUAL The manual white balance operation with adjustable “R GAIN” and “B GAIN”. 2) R GAIN Sets the R gain for manual white balance. This setting is valid when selecting “MANUAL” at “WB MODE”. Setting range: 0 to 1,023 3) B GAIN Sets the B gain for manual white balance. This setting is valid when selecting “MANUAL” at “WB MODE”. Setting range: 0 to 1,023 4) SHARPNESS Sets the sharpness (Edge enhancement) of image. a) H Sets the horizontal sharpness. Setting range:
00 (Soft) to 15 (Strong) Default: 03 b) V Sets the vertical sharpness. Setting range: 00 (Soft) to 15 (Strong) Default: 03 The noise level also emphasizes when using sharpness function. The SN ratio deteriorate for other than edge parts is prevented by cutting signal level that smaller than this setting. The image becomes soft image if this setting sets too large. Setting range: 00 to 63 Default: 02 5) CORING STC-HD213DVN-B / STC-HD213SDIN-B Product Specifications and User’s Guide 18/89