Introducing the OmniBook Configuring the OmniBook with the BIOS Setup Utility Power (APM) Menu* Default 1-14 Power Management Mode Disables time-outs, selects a combination of time-outs, or allows customized time-outs. Max Power Savings Smart CPU Mode Enables automatic CPU power savings. Absence of keyboard, mouse, and hard disk activity could cause slower CPU response. Off Standby Time-out Sets the period of inactivity after which the computer goes from On to Standby power mode. 2 minutes Suspend Time-out Sets the period of inactivity after which the computer goes from Standby to Suspend power mode.
(Skips Standby mode if that time-out is disabled.) 4 minutes Hibernate Time-out Sets whether the computer goes from Suspend to Hibernate power mode after the indicated period of inactivity. (Skips Suspend mode if that time-out is disabled.) 4 hours Hard Disk Time-out Sets the period of hard disk inactivity after which the hard disk stops spinning. Also affects a hard disk drive in the plug-in module bay. 2 minutes Time-out on AC Sets whether power management time-outs occur while the ac adapter is connected. Disabled Power Button Mode Sets the action of the blue power button when pressed for less than 4 seconds. Suspend Lid Switch Mode Sets the action when the OmniBook lid closes.
Turn off LCD Resume on Serial Ring Sets whether the system resumes from Suspend if a ring signal is received. Enabled Resume on Time of Day Sets whether the system resumes from Suspend at a defined time of day. Disabled Resume Time Sets the 24-hour time when the system resumes from Suspend if enabled. Auto Suspend on Undock Sets whether the OmniBook suspends after undocking. When Lid Closed Auto Turn-on on Dock Sets whether the OmniBook turns on after docking. Enabled * If you are using Windows 98 and have installed ACPI power management, the ACPI settings override settings in the Power menu.