Load Cell Module DVP02LC-SL CR#8, 9: CH1 to CH2 tare weight Explanations: You can write in the weight or read it by commands. Default: K0. Range: K-32,768 to K32,767. CR#10, 11: CH1 to CH2 average times Explanations: The range is 1 to 100. When the value exceeds 100, it will automatically be switched to 100. When it falls below 1, it will automatically be switched to 1. CR#12, 13: CH1 to CH2 average weight Explanations: The average weight is displayed. CR#14, 15: CH1 to CH2 present weight Explanations: The present weight is displayed. CR#16, 17: CH1 to CH2 times of standstill check Explanations: Default: K5. Range: K1 to K500. See 5.3.2 for details. CR#18, 19:
CH1 to CH2 range for standstill check Explanations: Default: K10. Range: K1 to K10,000. See 5.3.2 for details. CR#20, 21: CH1 to CH2 decimal point place Explanations: The place of the decimal point set up by the user. DVP-PLC Operation Manual 13 bit15 ~ 2 bit7 ~ 4 bit3 ~ 0 Reserved CH2 CH1 H’0 = gross weight H’1 = net weight H’F = channel disabled Range Default 1 ≤ average times ≤ 100 10 Range Default 0 ≤ decimal point place ≤ 4 2