Load Cell Module DVP02LC-SL „ Setting up responding time Times of auto-retry: Default = 1, range: 0 ~ 50 Time interval of auto-retry: Default = 3, range: 1 ~ 20 „ Setting up COM port COM port: Select the communication port to be connected with the MPU. Baud rate: 9600, 19200, 38400, 57600 or 115200 Data length: 7 bit or 8 bit. When the transmission mode is set to RTU, it will automatically be set to “8 bit”. Stop bit: 1 bit or 2 bit Parity: None, Odd or Even „ Auto-detection Transfer (transmission) mode: RTU or ASCII Click the “Auto-Detect” button, and all the connections will be auto-detected in the current transmission mode. 4.
After the communication settings are completed, click the icon on the toolbar, or select “Communication” -> “Online” to establish the connection between the software and DVP02LC-SL. 5. When you click “Online”, a window to upload the module data will appear, asking whether you are to upload the module data to the PC. Click “OK” to upload them and replace the set values already in the software. 6. Once you enter the online status, the screen will show the real-time data of DVP02LC-SL, including its current firmware version, the average values of CH1 and CH2, the average value of CH1 + CH2, the filter average values of CH1 and CH2 Note and the filter average value of CH1 + CH2.
You can click a value, and a window displaying the enlarged character will appear. DVP-PLC Operation Manual 20