Chapter 1 Introduction The AC motor drive should be kept in the shipping carton or crate before installation. In order to retain the warranty coverage, the AC motor drive should be stored properly when it is not to be used for an extended period of time. Storage conditions are: CAUTION! 1. Store in a clean and dry location free from direct sunlight or corrosive fumes. 2. Store within an ambient temperature range of -20 ° C to +60 ° C. 3. Store within a relative humidity range of 0% to 90% and non-condensing environment. 4. Store within an air pressure range of 86 kPA to 106kPA. 5. DO NOT place on the ground directly. It should be stored properly.
Moreover, if the surrounding environment is humid, you should put exsiccator in the package. 6. DO NOT store in an area with rapid changes in temperature. It may cause condensation and frost. 7. If the AC motor drive is stored for more than 3 months, the temperature should not be higher than 30 °C. Storage longer than one year is not recommended, it could result in the degradation of the electrolytic capacitors. 8. When the AC motor drive is not used for longer time after installation on building sites or places with humidity and dust, it’s best to move the AC motor drive to an environment as stated above.
1.1 Receiving and Inspection This VFD-EL AC motor drive has gone through rigorous quality control tests at the factory before shipment. After receiving the AC motor drive, please check for the following: Check to make sure that the package includes an AC motor drive, the User Manual/Quick Start and CD. Inspect the unit to assure it was not damaged during shipment. Make sure that the part number indicated on the nameplate corresponds with the part number of your order. 1.1.1 Nameplate Information Example for 1HP/0.75kW 3-phase 230V AC motor drive AC Drive Model Input Spec. Output Spec. Output Frequency Range MODELVFD007EL23A :
INPUT :3PH 200-240V 50/60Hz 5.1A OUTPUT :3PH 0-240V 4.2A 1.6kVA 0.75kW/1HP FREQUENCY RANGE : 0.1~ 599Hz Serial Number & Bar Code 007EL23A0T07140001 01.14 Software Version 1.1.2 Model Explanation VFD A 007 EL 23 Version Type A: Standard drive Mains Input Voltage 11:115 phase V 1- 21: phase 230V 1- 23:230 phase V 3- 43:460 phase V 3- VFD-EL Series 002: 0.25 HP(0.2kW) Applicable motor capacity 015: 2 HP(1.5kW) 004: 0.5 HP(0.4kW) 022: 3 HP(2.2kW) Series Name ( ariable requency rive) V F D 037: 5 HP(3.7kW) Revision 2016/03, 6ELE, V1.14 1-1 1-1