Midea T20A — инструкция

Room Air Conditioner USER MANUAL MODEL NUMBER: MSAG-10CRN8 MSAG-13CRN8 MSAG-19CRN8 MSAG-25CRN8 Warning notices: Before using this product, please read this manual and SAFETY MANUAL(if any) carefully and keep it for future reference. The design and specifications are subject to change without prior notice for product improvement. Consult with your dealer or manufacturer for details.The diagram above is just for reference. Please take the appearance of the actual product as the standard.

Стр. 1

THANK YOU LETTER Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly to ensure that you know how to operate the CONTENTS THANK YOU LETTER 01 SAFETY PRECAUTIONS 02 SPECIFICATIONS 06 PRODUCT OVERVIEW 07 PRODUCT INSTALLATION 08 Install Your Indoor Unit 10 Install Your Outdoor Unit Refrigent Piping Connection 20 25 Air Evacuation 29 Electrical And Gas Leak Checks 31 Test Run 32 Packing And Unpacking The Unit 33 OPERATION INSTRUCTIONS 34 Indoor Unit Display Remote Controller Specifications 34 39 CARE AND MAINTENANCE 51 TROUBLESHOOTING 53 TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT 56 DISPOSAL AND RECYCLING 56 DATA PROTECTION NOTICE 57 01

Стр. 3

SAFETY PRECAUTIONS It’s really important you read Safety Precautions Before Operation and Installation Incorrect installation due to ignoring instructions can cause serious damage or injury. The seriousness of potential damage or injuries is classified as either a WARNING or CAUTION. Explanation of Symbols Warning of electrical voltage This symbol indicates that there is a danger to life and health of persons due to voltage. Warning The signal word indicates a hazard with a medium level of risk which, if not avoided, may result in death or serious injury. Caution The signal word indicates a hazard with a low degree of risk which, if not avoided, may result in minor or moderate injury.

Attention The signal word indicates important information (e.g. damage to prop- erty), but not danger. Observe instructions This symbol indicates that a service technician should only operate and maintain this appliance in accordance with the operating instructions. Read these operating instructions carefully and attentively before using/commis- sioning the unit and keep them in the immediate vicinity of the installation site or unit for later use!

WARNING This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision(European Union countries).

This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. 02

Стр. 4

WARNING FOR PRODUCT USE If an abnormal situation arises (like a burning smell), immediately turn off the unit and disconnect the power. Call your dealer for instructions to avoid electric shock, fire or injury. Do not insert fingers, rods or other objects into the air inlet or outlet. This may cause injury, since the fan may be rotating at high speeds. Do not use flammable sprays such as hair spray, lacquer or paint near the unit. This may cause fire or combustion. Do not operate the air conditioner in places near or around combustible gases. Emitted gas may collect around the unit and cause explosion. Do not operate your air conditioner in a wet room such as a bathroom or laundry room.

Too much exposure to water can cause electrical components to short circuit. Do not expose your body directly to cool air for a prolonged period of time. Do not allow children to play with the air conditioner. Children must be supervised around the unit at all times. If the air conditioner is used together with burners or other heating devices, thoroughly ventilate the room to avoid oxygen deficiency. In certain functional environments, such as kitchens, server rooms, etc., the use of specially designed air-conditioning units is highly recommended. ELECTRICAL WARNINGS Only use the specified power cord.

If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The product must be properly grounded at the time of installation, or electrical shock may occur. For all electrical work, follow all local and national wiring standards, regulations, and the Installation Manual. Connect cables tightly, and clamp them securely to prevent external forces from damaging the terminal. Improper electrical connections can overheat and cause fire, and may also cause shock. All electrical connections must be made according to the Electrical Connection Diagram located on the panels of the indoor and outdoor units.

All wiring must be properly arranged to ensure that the control board cover can close properly. If the control board cover is not closed properly, it can lead to corrosion and cause the connection points on the terminal to heat up, catch fire, or cause electrical shock. Disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. Do not pull power cord to unplug unit. Hold the plug firmly and pull it from the outlet. Pulling directly on the cord can damage it, which can lead to fire or electric shock. Do not modify the length of the power supply cord or use an extension cord to power the unit. Do not share the electrical outlet with other appliances.

Improper or insufficient power supply can cause fire or electrical shock. Keep power plug clean. Remove any dust or grime that accumulates on or around the plug. Dirty plugs can cause fire or electric shock. If connecting power to fixed wiring, an all-pole disconnection device which has at least 3mm clearances in all poles, and have a leakage current that may exceed 10mA, the residual current device(RCD) having a rated residual operating current not exceeding 30mA, and disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. 03

Стр. 5