1.1 Product checking and accessories 1 order and the product is intact. Unpack the product and check the rating plate and the capacity plate of the inverter to ensure that the model agrees with the 2 Inverter model 3 Symbol Type FM 2 1 Symbol Description 0.4K to 500K 00023 to 12120 Applicable motor capacity (ND) (kW) Inverter rated current (SLD) (A) CA 4 5 F R - A 8 2 0 - 00046 - 1 - 6 7 8 Rating plate Inverter model INPUT :XXXXX MODEL :FR-A820-00046-1 9 Output rating Input rating OUTPUT:XXXXX SERIAL SERIAL:XXXXXXXXX 10 MADE IN XXXXX Country of origin *1 Specification differs by the type. Major differences are shown in the following table.
*2 Conforming to IEC 60721-3-3:1994 3C2/3S2 *3 Applicable for the FR-A820-00340(5.5K) or higher, and the FR-A840-00170(5.5K) or higher. In this Instruction Manual, the inverter model name consists of the applicable motor capacity and the rated current. (Example) FR-A820-00046(0.4K) 17 1.
INTRODUCTION 1.1 Product checking and accessories Symbol Voltage class 2 200 V class 4 400 V class Symbol Structure, functionality 0 Standard model 2 Separated converter type 6 IP55 compatible model 2 0 Symbol Circuit board coating cP o nla dte ud c to r None Without Without 60 With Without 06 With With Symbol Function None Standard type GF CC-Link IE Field Network functionality Type Monitor output Initial setting Built-in EMC filter Control logic Rated frequency Pr.19 Base frequency voltage FM (terminal FM equipped model) Terminal FM (pulse train output) Terminal AM (analog voltage output (0 to ±10 VDC)) OFF Sink logic 60 Hz 9999 (same as the power supply voltage) CA (terminal CA equipped model) Terminal CA (analog current output (0 to 20 mADC)) Terminal AM (analog voltage output (0 to ±10 VDC)) ON Source logic 50 Hz 8888 (95% of the power supply voltage) NOTE