Communication 1 2 3 4 5 6 7 CC-Link IE Field Network (FR-A800-GF) 8 9 2.6.2 Control logic (sink/source) change Switch the control logic of input signals as necessary. 10 To change the control logic, change the jumper connector position on the control circuit board. Connect the jumper connector to the connector pin of the desired control logic. The control logic of input signals is initially set to the sink logic (SINK) for the type FM inverter. The control logic of input signals is initially set to the source logic (SOURCE) for the type CA inverter.
(The output signals may be used in either the sink or source logic independently of the jumper connector position.) Jumper connector SOURCE SINK For sink logic 73 2. INSTALLATION AND WIRING 2.6 Control circuit Type Terminal symbol Terminal name Terminal function description Refer to page RS-485 — R on C PU connector Tr C W S-485 communication can be made through the PU connector (For connection a 1:1 basis only) onforming standard: EIA-485 (RS-485) ansmission format: Multidrop link ommunication speed: 4800 to 115200 bps iring length:
500 m 677 RS-485 terminals TXD+ Inverter transmission terminal R C Inverter reception Tr terminal C O Earthing (grounding) S-485 communication can be made through the RS-485 terminals. onforming standard: EIA-485 (RS-485) ansmission format: Multidrop link ommunication speed: 300 to 115200 bps verall length: 500 m 679 TXD- RXD+ RXD- GND (SG) USB — A Pl USB A connector to fu connector (receptacle). ug a USB memory device into this connector copy parameter settings or use the trace nction. Interface: conforms to USB 1.1 (USB 2.0 full-speed compatible) Transmission speed: 12 Mbps 86 Mi By co USB B connector in se in ni B connector (receptacle).
connecting the inverter to a personal mputer via this connector, FR Configurator2 stalled on the computer can be used for tting the inverter, or monitoring or testing the verter operation. 86 Type Terminal name Terminal function description Refer to page CC-Link IE PORT 1 Communication can be made via the CC-Link IE Field Network. 111 PORT 2